transactions.py (in diffs/osaka/bpo1)

ethereum.forks.osaka.transactionsethereum.forks.bpo1.transactions

Transactions are atomic units of work created externally to Ethereum and submitted to be executed. If Ethereum is viewed as a state machine, transactions are the events that move between states.

IntrinsicGasCost ¶

Intrinsic gas costs for a transaction, split by gas type.

32	@final

33	@dataclass

class IntrinsicGasCost:

regular ¶

Regular execution gas (calldata, base cost, access list, etc.).

37	regular: Uint

calldata_floor ¶

~~Minimum gas cost based on calldata size per EIP-7623.~~Minimum gas cost based on calldata size per [EIP-7623].

40	calldata_floor: Uint

TX_MAX_GAS_LIMIT ¶

44	TX_MAX_GAS_LIMIT = Uint(16_777_216)

LegacyTransaction ¶

Atomic operation performed on the block chain. This represents the original transaction format used before EIP-1559, EIP-2930, EIP-4844, and EIP-7702.

47	@final

48	@slotted_freezable

49	@dataclass

class LegacyTransaction:

nonce ¶

A scalar value equal to the number of transactions sent by the sender.

62	nonce: U256

gas_price ¶

The price of gas for this transaction, in wei.

67	gas_price: Uint

gas ¶

The maximum amount of gas that can be used by this transaction.

72	gas: Uint

to ¶

The address of the recipient. If empty, the transaction is a contract creation.

77	to: Bytes0 \| Address

value ¶

The amount of ether (in wei) to send with this transaction.

83	value: U256

data ¶

The data payload of the transaction, which can be used to call functions on contracts or to create new contracts.

88	data: Bytes

v ¶

The recovery id of the signature.

94	v: U256

r ¶

The first part of the signature.

99	r: U256

s ¶

The second part of the signature.

104	s: U256

Access ¶

A mapping from account address to storage slots that are pre-warmed as part of a transaction.

110	@final

111	@slotted_freezable

112	@dataclass

class Access:

account ¶

The address of the account that is accessed.

119	account: Address

slots ¶

A tuple of storage slots that are accessed in the account.

124	slots: Tuple[Bytes32, ...]

AccessListTransaction ¶

The transaction type added in EIP-2930 to support access lists.

This transaction type extends the legacy transaction with an access list and chain ID. The access list specifies which addresses and storage slots the transaction will access.

130	@final

131	@slotted_freezable

132	@dataclass

class AccessListTransaction:

chain_id ¶

The ID of the chain on which this transaction is executed.

144	chain_id: U64

nonce ¶

A scalar value equal to the number of transactions sent by the sender.

149	nonce: U256

gas_price ¶

The price of gas for this transaction.

154	gas_price: Uint

gas ¶

The maximum amount of gas that can be used by this transaction.

159	gas: Uint

to ¶

The address of the recipient. If empty, the transaction is a contract creation.

164	to: Bytes0 \| Address

value ¶

The amount of ether (in wei) to send with this transaction.

170	value: U256

data ¶

The data payload of the transaction, which can be used to call functions on contracts or to create new contracts.

175	data: Bytes

access_list ¶

A tuple of Access objects that specify which addresses and storage slots are accessed in the transaction.

181	access_list: Tuple[Access, ...]

y_parity ¶

The recovery id of the signature.

187	y_parity: U256

r ¶

The first part of the signature.

192	r: U256

s ¶

The second part of the signature.

197	s: U256

FeeMarketTransaction ¶

The transaction type added in EIP-1559.

This transaction type introduces a new fee market mechanism with two gas price parameters: max_priority_fee_per_gas and max_fee_per_gas.

203	@final

204	@slotted_freezable

205	@dataclass

class FeeMarketTransaction:

chain_id ¶

The ID of the chain on which this transaction is executed.

216	chain_id: U64

nonce ¶

A scalar value equal to the number of transactions sent by the sender.

221	nonce: U256

max_priority_fee_per_gas ¶

The maximum priority fee per gas that the sender is willing to pay.

226	max_priority_fee_per_gas: Uint

max_fee_per_gas ¶

The maximum fee per gas that the sender is willing to pay, including the base fee and priority fee.

231	max_fee_per_gas: Uint

gas ¶

The maximum amount of gas that can be used by this transaction.

237	gas: Uint

to ¶

The address of the recipient. If empty, the transaction is a contract creation.

242	to: Bytes0 \| Address

value ¶

The amount of ether (in wei) to send with this transaction.

248	value: U256

data ¶

The data payload of the transaction, which can be used to call functions on contracts or to create new contracts.

253	data: Bytes

access_list ¶

A tuple of Access objects that specify which addresses and storage slots are accessed in the transaction.

259	access_list: Tuple[Access, ...]

y_parity ¶

The recovery id of the signature.

265	y_parity: U256

r ¶

The first part of the signature.

270	r: U256

s ¶

The second part of the signature.

275	s: U256

BlobTransaction ¶

The transaction type added in EIP-4844.

This transaction type extends the fee market transaction to support blob-carrying transactions.

281	@final

282	@slotted_freezable

283	@dataclass

class BlobTransaction:

chain_id ¶

The ID of the chain on which this transaction is executed.

294	chain_id: U64

nonce ¶

A scalar value equal to the number of transactions sent by the sender.

299	nonce: U256

max_priority_fee_per_gas ¶

The maximum priority fee per gas that the sender is willing to pay.

304	max_priority_fee_per_gas: Uint

max_fee_per_gas ¶

The maximum fee per gas that the sender is willing to pay, including the base fee and priority fee.

309	max_fee_per_gas: Uint

gas ¶

The maximum amount of gas that can be used by this transaction.

315	gas: Uint

to ¶

The address of the recipient. If empty, the transaction is a contract creation.

320	to: Address

value ¶

The amount of ether (in wei) to send with this transaction.

326	value: U256

data ¶

The data payload of the transaction, which can be used to call functions on contracts or to create new contracts.

331	data: Bytes

access_list ¶

A tuple of Access objects that specify which addresses and storage slots are accessed in the transaction.

337	access_list: Tuple[Access, ...]

max_fee_per_blob_gas ¶

The maximum fee per blob gas that the sender is willing to pay.

343	max_fee_per_blob_gas: U256

blob_versioned_hashes ¶

A tuple of objects that represent the versioned hashes of the blobs included in the transaction.

348	blob_versioned_hashes: Tuple[VersionedHash, ...]

y_parity ¶

The recovery id of the signature.

354	y_parity: U256

r ¶

The first part of the signature.

359	r: U256

s ¶

The second part of the signature.

364	s: U256

SetCodeTransaction ¶

The transaction type added in EIP-7702.

This transaction type allows Ethereum Externally Owned Accounts (EOAs) to set code on their account, enabling them to act as smart contracts.

370	@final

371	@slotted_freezable

372	@dataclass

class SetCodeTransaction:

chain_id ¶

The ID of the chain on which this transaction is executed.

383	chain_id: U64

nonce ¶

A scalar value equal to the number of transactions sent by the sender.

388	nonce: U64

max_priority_fee_per_gas ¶

The maximum priority fee per gas that the sender is willing to pay.

393	max_priority_fee_per_gas: Uint

max_fee_per_gas ¶

The maximum fee per gas that the sender is willing to pay, including the base fee and priority fee.

398	max_fee_per_gas: Uint

gas ¶

The maximum amount of gas that can be used by this transaction.

404	gas: Uint

to ¶

The address of the recipient. If empty, the transaction is a contract creation.

409	to: Address

value ¶

The amount of ether (in wei) to send with this transaction.

415	value: U256

data ¶

The data payload of the transaction, which can be used to call functions on contracts or to create new contracts.

420	data: Bytes

access_list ¶

A tuple of Access objects that specify which addresses and storage slots are accessed in the transaction.

426	access_list: Tuple[Access, ...]

authorizations ¶

A tuple of Authorization objects that specify what code the signer desires to execute in the context of their EOA.

432	authorizations: Tuple[Authorization, ...]

y_parity ¶

The recovery id of the signature.

438	y_parity: U256

r ¶

The first part of the signature.

443	r: U256

s ¶

The second part of the signature.

448	s: U256

Transaction ¶

Union type representing any valid transaction type.

454	Transaction = (
455	LegacyTransaction
456	\| AccessListTransaction
457	\| FeeMarketTransaction
458	\| BlobTransaction
459	\| SetCodeTransaction
460	)

AccessListCapableTransaction ¶

Transaction types that include an EIP-2930-style access list.

See has_access_list and Access for more details.

466	AccessListCapableTransaction = (
467	AccessListTransaction
468	\| FeeMarketTransaction
469	\| BlobTransaction
470	\| SetCodeTransaction
471	)

FeeMarketCapableTransaction ¶

Transaction types that include the EIP-1559-style fee structure.

See FeeMarketTransaction for more details.

483	FeeMarketCapableTransaction = (
484	FeeMarketTransaction \| BlobTransaction \| SetCodeTransaction
485	)

encode_transaction ¶

Encode a transaction into its RLP or typed transaction format. Needed because non-legacy transactions aren't RLP.

Legacy transactions are returned as-is, while other transaction types are prefixed with their type identifier and RLP encoded.

def encode_transaction(tx: Transaction) -> LegacyTransaction | Bytes:

497	<snip>
504	if isinstance(tx, LegacyTransaction):
505	return tx
506	elif isinstance(tx, AccessListTransaction):
507	return b"\x01" + rlp.encode(tx)
508	elif isinstance(tx, FeeMarketTransaction):
509	return b"\x02" + rlp.encode(tx)
510	elif isinstance(tx, BlobTransaction):
511	return b"\x03" + rlp.encode(tx)
512	elif isinstance(tx, SetCodeTransaction):
513	return b"\x04" + rlp.encode(tx)
514	else:
515	raise Exception(f"Unable to encode transaction of type {type(tx)}")

decode_transaction ¶

Decode a transaction from its RLP or typed transaction format. Needed because non-legacy transactions aren't RLP.

Legacy transactions are returned as-is, while other transaction types are decoded based on their type identifier prefix.

def decode_transaction(tx: LegacyTransaction | Bytes) -> Transaction:

519	<snip>
526	if isinstance(tx, Bytes):
527	if tx[0] == 1:
528	return rlp.decode_to(AccessListTransaction, tx[1:])
529	elif tx[0] == 2:
530	return rlp.decode_to(FeeMarketTransaction, tx[1:])
531	elif tx[0] == 3:
532	return rlp.decode_to(BlobTransaction, tx[1:])
533	elif tx[0] == 4:
534	return rlp.decode_to(SetCodeTransaction, tx[1:])
535	else:
536	raise TransactionTypeError(tx[0])
537	else:
538	return tx

The gas in a transaction gets used to pay for the intrinsic cost of operations, therefore if there is insufficient gas then it would not be possible to execute a transaction and it will be declared invalid.

Additionally, the nonce of a transaction must not equal or exceed the limit defined in EIP-2681. In practice, defining the limit as 2**64-1 has no impact because sending 2**64-1 transactions is improbable. It's not strictly impossible though, 2**64-1 transactions is the entire capacity of the Ethereum blockchain at 2022 gas limits for a little over 22 years.

Also, the code size of a contract creation transaction must be within limits of the protocol.

This function takes a transaction as a parameter and returns the intrinsic gas cost and the minimum calldata gas cost for the transaction after validation. It throws an InsufficientTransactionGasError exception if the transaction does not provide enough gas to cover the intrinsic cost, and a NonceOverflowError exception if the nonce is greater than 2**64 - 2. It also raises an InitCodeTooLargeError if the code size of a contract creation transaction exceeds the maximum allowed size.

def validate_transaction(tx: Transaction) -> IntrinsicGasCost:

542	<snip>
570	from .vm.interpreter import MAX_INIT_CODE_SIZE
571
572	intrinsic = calculate_intrinsic_cost(tx)
573	if max(intrinsic.regular, intrinsic.calldata_floor) > tx.gas:
574	raise InsufficientTransactionGasError("Insufficient gas")
575	if U256(tx.nonce) >= U256(U64.MAX_VALUE):
576	raise NonceOverflowError("Nonce too high")
577	if tx.to == Bytes0(b"") and len(tx.data) > MAX_INIT_CODE_SIZE:
578	raise InitCodeTooLargeError("Code size too large")
579	if tx.gas > TX_MAX_GAS_LIMIT:
580	raise TransactionGasLimitExceededError("Gas limit too high")
581
582	return intrinsic

calculate_intrinsic_cost ¶

Calculates the gas that is charged before execution is started.

The intrinsic cost of the transaction is charged before execution has begun. Functions/operations in the EVM cost money to execute so this intrinsic cost is for the operations that need to be paid for as part of the transaction. Data transfer, for example, is part of this intrinsic cost. It costs ether to send data over the wire and that ether is accounted for in the intrinsic cost calculated in this function. This intrinsic cost must be calculated and paid for before execution in order for all operations to be implemented.

The intrinsic cost includes:

Base cost (TX_BASE)
Cost for data (zero and non-zero bytes)
Cost for contract creation (if applicable)
Cost for access list entries (if applicable)
Cost for authorizations (if applicable)

This function takes a transaction as a parameter and returns the intrinsic gas cost of the transaction and the minimum gas cost used by the transaction based on the calldata size.

def calculate_intrinsic_cost(tx: Transaction) -> IntrinsicGasCost:

586	<snip>
610	from .vm.gas import GasCosts, init_code_cost
611
612	num_zeros = Uint(tx.data.count(0))
613	num_non_zeros = ulen(tx.data) - num_zeros
614
615	tokens_in_calldata = num_zeros + num_non_zeros * Uint(4)
616	# EIP-7623 floor price (note: no EVM costs)
617	calldata_floor_gas_cost = (
618	tokens_in_calldata * GasCosts.TX_DATA_TOKEN_FLOOR + GasCosts.TX_BASE
619	)
620
621	data_cost = tokens_in_calldata * GasCosts.TX_DATA_TOKEN_STANDARD
622
623	if tx.to == Bytes0(b""):
624	create_cost = GasCosts.TX_CREATE + init_code_cost(ulen(tx.data))
625	else:
626	create_cost = Uint(0)
627
628	access_list_cost = Uint(0)
629	if has_access_list(tx):
630	for access in tx.access_list:
631	access_list_cost += GasCosts.TX_ACCESS_LIST_ADDRESS
632	access_list_cost += (
633	ulen(access.slots) * GasCosts.TX_ACCESS_LIST_STORAGE_KEY
634	)
635
636	auth_cost = Uint(0)
637	if isinstance(tx, SetCodeTransaction):
638	auth_cost += Uint(
639	GasCosts.AUTH_PER_EMPTY_ACCOUNT * len(tx.authorizations)
640	)
641
642	return IntrinsicGasCost(
643	regular=Uint(
644	GasCosts.TX_BASE
645	+ data_cost
646	+ create_cost
647	+ access_list_cost
648	+ auth_cost
649	),
650	calldata_floor=calldata_floor_gas_cost,
651	)

chain_id ¶

Extract the chain identifier from a transaction. See EIP-155.

def chain_id(tx: Transaction) -> None | U64:

655	<snip>
660	if isinstance(tx, LegacyTransaction):
661	if tx.v == 27 or tx.v == 28:
662	return None
663
664	if tx.v < U256(35):
665	raise InvalidSignatureError("bad v")
666
667	return U64((tx.v - U256(35)) >> U256(1))
668	else:
669	return tx.chain_id

recover_sender ¶

Extracts the sender address from a transaction.

The v, r, and s values are the three parts that make up the signature of a transaction. In order to recover the sender of a transaction the two components needed are the signature (v, r, and s) and the signing hash of the transaction. The sender's public key can be obtained with these two values and therefore the sender address can be retrieved.

This function takes chain_id and a transaction as parameters and returns the address of the sender of the transaction. It raises an InvalidSignatureError if the signature values (r, s, v) are invalid.

def recover_sender(tx: Transaction) -> Address:

673	<snip>
686	r, s = tx.r, tx.s
687	if U256(0) >= r or r >= SECP256K1N:
688	raise InvalidSignatureError("bad r")
689	if U256(0) >= s or s > SECP256K1N // U256(2):
690	raise InvalidSignatureError("bad s")
691
692	if isinstance(tx, LegacyTransaction):
693	v = tx.v
694	if v == 27 or v == 28:
695	public_key = secp256k1_recover(
696	r, s, v - U256(27), signing_hash_pre155(tx)
697	)
698	else:
699	assert v >= U256(35), "call chain_id before recover_sender"
700	tx_chain_id = U64((v - U256(35)) >> U256(1))
701	v = (v - U256(35)) & U256(1)
702	public_key = secp256k1_recover(
703	r,
704	s,
705	v,
706	signing_hash_155(tx, tx_chain_id),
707	)
708	elif isinstance(tx, AccessListTransaction):
709	if tx.y_parity not in (U256(0), U256(1)):
710	raise InvalidSignatureError("bad y_parity")
711	public_key = secp256k1_recover(
712	r, s, tx.y_parity, signing_hash_2930(tx)
713	)
714	elif isinstance(tx, FeeMarketTransaction):
715	if tx.y_parity not in (U256(0), U256(1)):
716	raise InvalidSignatureError("bad y_parity")
717	public_key = secp256k1_recover(
718	r, s, tx.y_parity, signing_hash_1559(tx)
719	)
720	elif isinstance(tx, BlobTransaction):
721	if tx.y_parity not in (U256(0), U256(1)):
722	raise InvalidSignatureError("bad y_parity")
723	public_key = secp256k1_recover(
724	r, s, tx.y_parity, signing_hash_4844(tx)
725	)
726	elif isinstance(tx, SetCodeTransaction):
727	if tx.y_parity not in (U256(0), U256(1)):
728	raise InvalidSignatureError("bad y_parity")
729	public_key = secp256k1_recover(
730	r, s, tx.y_parity, signing_hash_7702(tx)
731	)
732
733	return Address(keccak256(public_key)[12:32])

signing_hash_pre155 ¶

Compute the hash of a transaction used in a legacy (pre EIP-155) signature.

This function takes a legacy transaction as a parameter and returns the signing hash of the transaction.

def signing_hash_pre155(tx: LegacyTransaction) -> Hash32:

737	<snip>
746	return keccak256(
747	rlp.encode(
748	(
749	tx.nonce,
750	tx.gas_price,
751	tx.gas,
752	tx.to,
753	tx.value,
754	tx.data,
755	)
756	)
757	)

signing_hash_155 ¶

Compute the hash of a transaction used in a EIP-155 signature.

This function takes a legacy transaction and a chain ID as parameters and returns the hash of the transaction used in an EIP-155 signature.

def signing_hash_155(tx: LegacyTransaction, chain_id: U64) -> Hash32:

761	<snip>
769	return keccak256(
770	rlp.encode(
771	(
772	tx.nonce,
773	tx.gas_price,
774	tx.gas,
775	tx.to,
776	tx.value,
777	tx.data,
778	chain_id,
779	Uint(0),
780	Uint(0),
781	)
782	)
783	)

signing_hash_2930 ¶

Compute the hash of a transaction used in a EIP-2930 signature.

This function takes an access list transaction as a parameter and returns the hash of the transaction used in an EIP-2930 signature.

def signing_hash_2930(tx: AccessListTransaction) -> Hash32:

787	<snip>
795	return keccak256(
796	b"\x01"
797	+ rlp.encode(
798	(
799	tx.chain_id,
800	tx.nonce,
801	tx.gas_price,
802	tx.gas,
803	tx.to,
804	tx.value,
805	tx.data,
806	tx.access_list,
807	)
808	)
809	)

signing_hash_1559 ¶

Compute the hash of a transaction used in an EIP-1559 signature.

This function takes a fee market transaction as a parameter and returns the hash of the transaction used in an EIP-1559 signature.

def signing_hash_1559(tx: FeeMarketTransaction) -> Hash32:

813	<snip>
821	return keccak256(
822	b"\x02"
823	+ rlp.encode(
824	(
825	tx.chain_id,
826	tx.nonce,
827	tx.max_priority_fee_per_gas,
828	tx.max_fee_per_gas,
829	tx.gas,
830	tx.to,
831	tx.value,
832	tx.data,
833	tx.access_list,
834	)
835	)
836	)

signing_hash_4844 ¶

Compute the hash of a transaction used in an EIP-4844 signature.

This function takes a transaction as a parameter and returns the signing hash of the transaction used in an EIP-4844 signature.

def signing_hash_4844(tx: BlobTransaction) -> Hash32:

840	<snip>
848	return keccak256(
849	b"\x03"
850	+ rlp.encode(
851	(
852	tx.chain_id,
853	tx.nonce,
854	tx.max_priority_fee_per_gas,
855	tx.max_fee_per_gas,
856	tx.gas,
857	tx.to,
858	tx.value,
859	tx.data,
860	tx.access_list,
861	tx.max_fee_per_blob_gas,
862	tx.blob_versioned_hashes,
863	)
864	)
865	)

signing_hash_7702 ¶

Compute the hash of a transaction used in a EIP-7702 signature.

This function takes a transaction as a parameter and returns the signing hash of the transaction used in a EIP-7702 signature.

def signing_hash_7702(tx: SetCodeTransaction) -> Hash32:

869	<snip>
877	return keccak256(
878	b"\x04"
879	+ rlp.encode(
880	(
881	tx.chain_id,
882	tx.nonce,
883	tx.max_priority_fee_per_gas,
884	tx.max_fee_per_gas,
885	tx.gas,
886	tx.to,
887	tx.value,
888	tx.data,
889	tx.access_list,
890	tx.authorizations,
891	)
892	)
893	)

get_transaction_hash ¶

Compute the hash of a transaction.

This function takes a transaction as a parameter and returns the keccak256 hash of the transaction. It can handle both legacy transactions and typed transactions (AccessListTransaction, FeeMarketTransaction, etc.).

def get_transaction_hash(tx: Bytes | LegacyTransaction) -> Hash32:

897	<snip>
905	assert isinstance(tx, (LegacyTransaction, Bytes))
906	if isinstance(tx, LegacyTransaction):
907	return keccak256(rlp.encode(tx))
908	else:
909	return keccak256(tx)

has_access_list ¶

Return whether the transaction has an EIP-2930-style access list.

def has_access_list(tx: Transaction) -> TypeGuard[AccessListCapableTransaction]:

915	<snip>
920	return isinstance(
921	tx,
922	AccessListCapableTransaction,
923	)

Search Results

ethereum.forks.osaka.transactionsethereum.forks.bpo1.transactions